UL10059 PVC Hook-Up Wire

UL10059 is a PVC-insulated hook-up wire manufactured by Xinya Electronic Co., Ltd. It is supplied in 15 recorded constructions spanning 16–32 AWG, with an overall diameter of 0.75–2.1 mm, cut to the length you order.

UL10059 at a glance

• 16–32 AWG, across 15 listed constructions
• Stranded conductor throughout the documented range
• Insulation wall 0.25–0.31 mm
• Overall diameter 0.75–2.1 mm
• Max. conductor resistance 14.6–595 Ω/km at 20 °C DC (roughly 4.5–181.4 Ω per 1,000 ft)
• Routine withstand test on every listed row: 1500 VAC, 1 min

How UL10059 compares with its nearest alternatives

UL10059 and UL1061 share the PVC insulation. Overall diameter runs 0.75–2.1 mm for UL10059 against 0.75–2.7 mm for UL1061. UL10059 is the tighter of the two where harness space is limited. Size coverage is 16–32 AWG against 14–30 AWG.

UL10059 and UL10272 share the PVC insulation. Overall diameter runs 0.75–2.1 mm for UL10059 against 0.65–1.4 mm for UL10272. UL10272 is the tighter of the two, so UL10059 is the option to take only when the larger diameter is acceptable. Insulation wall is 0.25–0.31 mm against 0.2–0.22 mm. Size coverage is 16–32 AWG against 20–32 AWG.

Conductor construction and selection

Every construction listed for UL10059 is a stranded conductor, which suits harnesses and assemblies that are flexed or routed around a bend. The resistance column gives the maximum permitted value for the conductor at 20 °C DC.

How to read the UL10059 table

“Insulation O.D. (mm)” is measured over the insulation, not over a jacket, tape or braid. Conductor resistance is stated at 20 °C DC per kilometre — divide by 3.281 for ohms per 1,000 ft. The withstand column is a routine production test applied to finished lengths, not a continuous working voltage.

Questions buyers ask about UL10059

Which sizes of UL10059 are available?

16–32 AWG, across the 15 constructions in the table below. Sizes outside the table can be quoted on request.

Is UL10059 a stranded conductor?

Every construction documented for this line is stranded. Confirm the strand count you need — the “n/mm” figure in the table — because resistance and flexibility both depend on it, and two rows at the same size can differ.

What overall diameter does UL10059 run to?

The documented range is 0.75–2.1 mm. Quote the size, not the style alone, when the diameter has to fit a specific gland, grommet or channel.