UL11079 150 V 80 °C PVC Hook-Up Wire

UL11079 is a PVC-insulated hook-up wire manufactured by Xinya Electronic Co., Ltd. It is rated 150 V, 80 °C. It is supplied in 6 recorded constructions spanning 26–32 AWG, with an overall diameter of 0.65–0.9 mm, cut to the length you order.

UL11079 at a glance

• 26–32 AWG, across 6 listed constructions
• Stranded conductor throughout the documented range
• Insulation wall 0.2–0.21 mm
• Overall diameter 0.65–0.9 mm
• Max. conductor resistance 150–595 Ω/km at 20 °C DC (roughly 45.7–181.4 Ω per 1,000 ft)
• Routine withstand test on every listed row: 1500 VAC, 1 min

How UL11079 compares with its nearest alternatives

UL11079 and UL10272 share the 150 V rating and 80 °C temperature rating. Overall diameter runs 0.65–0.9 mm for UL11079 against 0.65–1.4 mm for UL10272. UL11079 is the tighter of the two where harness space is limited. Size coverage is 26–32 AWG against 20–32 AWG.

UL11079 and UL1061 share the 80 °C temperature rating and PVC insulation. The distinction is in voltage rating (150 V against 300 V). Overall diameter runs 0.65–0.9 mm for UL11079 against 0.75–2.7 mm for UL1061. UL11079 is the tighter of the two where harness space is limited. Insulation wall is 0.2–0.21 mm against 0.25–0.41 mm.

Conductor construction and selection

Every construction listed for UL11079 is a stranded conductor, which suits harnesses and assemblies that are flexed or routed around a bend. The resistance column gives the maximum permitted value for the conductor at 20 °C DC.

How to read the UL11079 table

“Insulation O.D. (mm)” is measured over the insulation, not over a jacket, tape or braid. Conductor resistance is stated at 20 °C DC per kilometre — divide by 3.281 for ohms per 1,000 ft. The withstand column is a routine production test applied to finished lengths, not a continuous working voltage.

Questions buyers ask about UL11079

Which sizes of UL11079 are available?

26–32 AWG, across the 6 constructions in the table below. Sizes outside the table can be quoted on request.

Is UL11079 a stranded conductor?

Every construction documented for this line is stranded. Confirm the strand count you need — the “n/mm” figure in the table — because resistance and flexibility both depend on it, and two rows at the same size can differ.

What overall diameter does UL11079 run to?

The documented range is 0.65–0.9 mm. Quote the size, not the style alone, when the diameter has to fit a specific gland, grommet or channel.