Skip to content
Authorized Suzhou distributor · Xinya Electronic Co., Ltd. 📞 +86 15862457677 📫 [email protected]
Xinya AWM Wire Authorized Suzhou distributor · Xinya Electronic Co., Ltd.

Wire catalogue  / UL PV Wire

UL PV Wire, UL 4703, E331816

UL4703 photovoltaic DC cable, 8–12 AWG. O.D. 5.6–8 mm, stranded. UL 4703 E331816 cited. Quote on request.

UL PV Wire, UL 4703, E331816 product image
Inquiry-only catalogue. No prices are published and there is no cart. Send the quantity, colour and length — or your BOM — and we will quote directly.
Documented on file

UL 4703 · E331816 is cited for this line. Request the issued document before relying on it for a finished-product approval.

Request certificate or datasheet →

UL4703 is a photovoltaic DC cable manufactured by Xinya Electronic Co., Ltd. The catalogue describes it as a photovoltaic DC construction. It is supplied in 3 recorded constructions spanning 8–12 AWG, with an overall diameter of 5.6–8 mm, cut to the length you order.

UL4703 at a glance

  • 8–12 AWG, across 3 listed constructions
  • Stranded conductor throughout the documented range
  • Insulation wall 0.76 mm
  • Overall diameter 5.6–8 mm
  • Max. conductor resistance 2.23–5.64 Ω/km at 20 °C DC (roughly 0.7–1.7 Ω per 1,000 ft)

How UL4703 compares with its nearest alternatives

UL4703 and UL1277 sit in the same catalogue group but are rated differently. Overall diameter runs 5.6–8 mm for UL4703 against 8.4–19.3 mm for UL1277. UL4703 is the tighter of the two where harness space is limited. Size coverage is 8–12 AWG against 12–18 AWG.

Conductor construction and selection

Every construction listed for UL4703 is a stranded conductor, which suits harnesses and assemblies that are flexed or routed around a bend. The resistance column gives the maximum permitted value for the conductor at 20 °C DC.

How to read the UL4703 table

“Insulation O.D. (mm)” is measured over the insulation, not over a jacket, tape or braid. “Jacket O.D. (mm)” is the finished cable diameter, which is the value to quote for gland, grommet and connector sizing. Conductor resistance is stated at 20 °C DC per kilometre — divide by 3.281 for ohms per 1,000 ft.

Questions buyers ask about UL4703

Which sizes of UL4703 are available?

8–12 AWG, across the 3 constructions in the table below. Sizes outside the table can be quoted on request.

Is UL4703 a stranded conductor?

Every construction documented for this line is stranded. Confirm the strand count you need — the “n/mm” figure in the table — because resistance and flexibility both depend on it, and two rows at the same size can differ.

What overall diameter does UL4703 run to?

The documented range is 5.6–8 mm. Quote the size, not the style alone, when the diameter has to fit a specific gland, grommet or channel.

Manufacturer product data

  • UL recognized file: E331816 (source catalogue)
  • Rated temperature: 105 °C dry / 90 °C wet
  • Rated voltage: 600 V; 1000 V or 2000 V for the additional construction series
  • Reference standard: UL 4703
  • Conductor: stranded tinned or bare copper
  • XLPE insulation and XLPE covering
  • Passes UL flame test
  • UV and ozone resistant
  • Application: photovoltaic systems

Detailed specification table

Scroll horizontally to view all specifications

UL PV Wire construction data
AWGConstruction (No./mm)Conductor diameter (mm)Insulation thickness (mm)Insulation O.D. (mm)Jacket thickness (mm)Jacket O.D. (mm)Max. conductor resistance (Ω/km, 20°C, DC)
1265/0.2542.360.764.000.765.605.64
10105/0.2543.00.764.700.766.303.546
8168/0.2543.990.766.400.768.002.23

Source specification sheet: UL PV Wire-E331816_1.jpg, UL_PV_Wire_E331816_EN.jpg.

Request a quote for this line

Tell us the style, AWG, colour and quantity — or attach nothing and just describe the requirement. We reply to every enquiry.

We use your details only to answer this enquiry. No prices are published on this site.

No file chosen

Accepted: PDF, Word, Excel, CSV, image, DWG, DXF or ZIP up to 10 MB.

More UL PV Wire options

Related selection guides

Compare the style, voltage, temperature, insulation and construction before requesting a quotation.

Questions & answers

Frequently asked questions

Certifications, lead time, payment, shipping and MOQ — the points buyers ask about most often. If something is still unclear, send us your requirement and we will answer directly. See the full FAQ →

01 Are you a manufacturer or a trading company?

We are a wire harness manufacturer — cutting, stripping, crimping, sealing and testing are all carried out in-house at our Suzhou plant. We are also an authorised distributor of Xinya brand electronic wire, so you can source both the wire and the finished harness from one supplier.

02 What certifications do your electronic wires have?

Our electronic wires carry UL, VDE, PSE and CE approvals, together with RoHS and REACH compliance for the European market; TUV approvals are available for PV and renewable-energy wire. Certificates and test reports are issued by the manufacturer and can be supplied with your quotation on request.

03 How long is the lead time?

For electronic wire, popular styles such as UL1007, UL1015, UL1061 and UL1569 are normally available quickly; other styles, non-standard colours and cut lengths usually take around 7 days. Wire harnesses are made to order, so the schedule depends on your drawing, connector availability and quantity — we confirm it in the quotation.

04 What are your payment terms?

We commonly accept T/T (telegraphic transfer), PayPal and Western Union. Typically a 30% deposit is required before production, with the balance paid before shipment.

05 How do you ship the goods?

Samples and small orders are shipped by international express (DHL, FedEx, UPS, TNT) or by air freight. Larger orders normally go by sea to reduce freight cost. We can quote EXW, FOB, CIF or door-to-door terms and will recommend the option that best fits your budget and delivery date.

06 Do you have a minimum order quantity (MOQ)?

We keep a low MOQ to support your business. Generally the MOQ is 1 piece for standard models, although it may vary slightly for customised products. Small trial orders are welcome.

07 Can you build harnesses to our own drawing or sample?

Yes. We build to print and build to sample — send us a 2D drawing, a BOM, connector part numbers or even a photo of the part in use, and we will assemble, test and quote accordingly.

08 Can I get a sample before placing a bulk order?

Yes. We are happy to build a prototype first so that you can approve the fit, crimp and finish before committing to volume. Send the drawing and the target quantity and we will quote sample cost and lead time.

09 What information do you need to give a quotation?

For wire: the style or UL number, AWG, voltage and temperature rating, insulation, conductor, colour and length. For harnesses: the drawing or BOM, connector brand and part number, terminal and housing type, wire specification, cut length and tolerance, sleeving or tubing, label and packaging requirements, quantity and destination. If anything is unclear we will ask — or propose a construction for you.

10 Do you support OEM / ODM and private labelling?

Yes. We work with customer-specified connectors and brands as well as JST, Molex and HongXing, and can add printed markers, custom labels, printed bags and your own carton artwork for OEM and ODM projects.

11 How do you control quality?

Every order goes through incoming wire inspection, cutting and stripping checks, crimp height and terminal pull-force testing, 100% continuity and open-and-short testing, and a final dimensional and visual inspection. Inspection records can be supplied with the shipment when your project requires them.

12 Can you help with wire and connector selection?

Yes — our engineers help match wire gauge, insulation and temperature rating to your current, voltage and working environment, and select a terminal and housing combination that crimps reliably. Describe the application or send a sample and we will propose a construction.

13 Can you supply cut lengths and custom packaging?

Yes. Wire can be supplied in cut lengths, coils or spools, with PE bags, cartons, pallets and printed labels arranged to suit your warehouse or production line.

14 Do you ship worldwide, and can I visit the factory?

We ship worldwide, with regular shipments to Europe, North America, South-East Asia, the Middle East and Australia. You are welcome to visit our plant in Suzhou, and you can see our production lines in the factory videos on this site.

15 What happens if there is a quality problem after delivery?

Contact us with the order or batch number and photos of the issue. We will check it against our production and inspection records and, where the fault is confirmed on our side, arrange replacement or credit.

Need wire to a specification?

Send the style, AWG range, colour and length — or your BOM and drawing. We will come back with construction, availability and lead time. This catalogue publishes no prices; every enquiry is quoted directly.

Request a quote